 |
 |
 |
|
- ENTRY/EXIT DIRECT CONNECTION.
Thanks to an innovative, patented design, the MILLENNIUM Reel does not
use rotating rings with brush rub or mercury contacts. Therefore, all
the problems associated with the rotary contacts have been eliminated,
including faulty contact during rotation as well as maintenance and
replacement of the contacts. - GREATER EFFICIENCY. The 3 springs
used for rewinding the cable double as wires for the three electric
signals. This provides for greater efficiency since there are no
contacts. - ULTRA FLAT. The reel's thickness is just 4.8cm, slightly more than the piste's height.
- FEWER WINDING TURNS. The diameter of the cable coil is 31cm. Therefore the reel can wind the 20-meter cable in just 20 turns. By contrast, currently available reels require 40 to 50 turns.
- LONGER LASTING SPRINGS. Springs last longer for three reasons:
- The spring work is greatly reduced thanks to fewer turns of the cable coil.
- The
central pin where the springs turn is large in diameter (3.6cm) and
thus reduces the stress of the spring on this fragile location. - 3 springs are used, working in concert to reduce stress on any one spring.
- HIGH QUALITY SPRINGS. The springs are made from a special top-quality steel strip.
- LONGER LASTING CABLE. The large diameter of the cable coil
not only enlarges the cable camber, but also reduces the number of its
bending. Therefore the cable has a longer lasting (both for the
external boot and 3 internal wires). - STRONG STAINLESS STEEL CASE. The case is sturdy and easy to clean. In addition, thanks to its flat, square shape, it is easy to carry and store.
- ADVERTINSING SPACE. The top of the reel has flat surface area of 33cm x 33cm, allowing for advertising space.
- STEADINESS ON THE FLOOR. Thanks to its solid 4.8kg weight and its four "rubber feet”, the reel is extremely steady - pulls on the cable during matches can hardly move the reel.
- CABLE PROTECTION DAMPING SPRING. The cable next to the fencer's end socket usually requires many repairs over time. To reduce this problem, a 10cm spring was placed at this location to not only
- minimize bending of the cable at the socket exit,
- but also dampen the stress on the cable when the socket reaches the reel after the fencer's release.
- INNOVATIVE BRAKING SYSTEM. The reel's design moderates the speed of winding when the cable is released from longer distances. The braking mechanism
exploits centrifugal force and activates only when the reel exceeds a
certain rotary speed. Strong or “bad” pulls received by the cable at
the end of the run are therefore avoided.
|
|
|
|
|
|
|
|
|
